Then I got the back frame back into one piece.
Before: the lip all broken off!
All back into one piece:
Before: Corner busted out
After: Corner back together:
Close up- it's a little rough, but the window will cover it.
Reinforced with fiberglass on the back: It goes down under the lip about 1 inch.
This will be covered by the paneling I had to rip out! :)
I'm out of goo, so I have to make more and finish several more coats and the rest of the fiberglass matting.
You might try putting a skim coat of "goo" on the fiberglass mesh, then you can shape it or cut it without getting all those frayed pieces of mesh everywhere. I like to use a small cake decorating spatula to rub my mesh into place and then you can use a brush if you prefer to finish the repair. Keep up the good work.
ReplyDeleteThanks, I'll try that next time!
ReplyDelete